Dillon-precision XL 650 Manuel d'utilisateur télécharger pdf (Page 36)

FIG 165

3. Rotate the primer system upside

down. Using an 1/8” Allen wrench

unscrew the primer support shim

screw and remove the primer support

shim FIG 165.

FIG 166

4. Remove the rotary primer disc FIG

166. Make sure the detent ball

remains in place.

5. Place the other rotary primer disc

onto the disc pin.

6. Slip the primer support shim back

into place and snug the screw.

7. Reinstall the primer system.

FIG 167

Note: About Steps 6, 7 and 8. If you’re

changing from a large rifle/pistol

primer to a small rifle/pistol primer

or vice versa, the rotary primer disc,

primer magazine, and primer punch

will have to be changed. This is

because each of these three items

are designed specifically for either

large rifle/pistol primers or small

rifle/pistol primers.

Step 7

) Change the primer magazine

(see note just above Step 6

):

1. Remove the Primer Early Warning

System FIG 167.

FIG 168

2. Remove the primer shield cap FIG

168.

FIG 169

3. Remove the primer magazine by

pulling it straight up FIG 169.

4. Insert the new primer magazine.

5. Replace the primer shield cap and

Primer Early Warning System.

FIG 170

Step 8) Change the primer punch (see

note just above Step 7):

The primer punch is attached to the

underside of the platform on the right side

FIG 170. See the schematic on page 52.

FIG 171

1. Raise the platform.

2. Using a 9/16” wrench loosen and

remove the primer punch FIG 171.

3. Remove the other size primer punch

from the primer accessory package.

Screw it in and snug it down.

4. Lower the platform.

Note: It may be necessary to readjust the

primer station locator tab, #13242,

see page 55 for schematic.

Step 9

) Install the new shellplate:

This is located in your caliber conver-

sion kit.

1. Remove the shellplate (ref. Step 4

).

2. Place the new shellplate onto the

shellplate platform. The number side

of the shellplate should be face up.

Rotate the shellplate until it seats

itself on the index ball.

37

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 58 59

Commentaires sur ces manuels

Pas de commentaire