Dillon-precision XL 650 Manuel d'utilisateur télécharger pdf (Page 21)

D. Station 1 – The decapping

assembly FIG 78:

Dillon decapping assemblies are made

with replaceable decap pins. One extra pin

is included with each sizing die. To replace

a bent or broken pin, simply:

FIG 83

1. Unscrew the decapping assembly

from the top of the die FIG 83.

FIG 84

2. Unscrew the decapping pin (see

arrow FIG 84), and replace it with a

new one.

3. Screw the decapping assembly back

into the sizing die.

Note: The decapping assembly can be

removed from the sizing die without

affecting the adjustment of the siz-

ing die or sizing operation.

Note: The decapping assembly must be

removed when loading primed

cases.

FIG 85

FIG 86

FIG 87

E. Station 2 – Installation

of powder measure assem-

bly FIG 85:

1. Using a 5/32” Allen wrench, loosen

the two collar clamp screws and

remove the powder die FIG 86 & 87.

FIG 88

2. Thread the powder die into Station 2.

Screw it down about halfway FIG 88.

FIG 89

3. Remove the powder funnel from the

bag containing the brass locator but-

tons FIG 89.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 58 59

Pas de commentaire

Dillon-precision XL 650 Manuel d'utilisateur Page 21